Top 15 best sliding compound mitre saws: price/quality ranking 2021-2022 and what budget professional saw to choose for your home

1Cutting long parts is almost impossible without a coping saw.

For carpentry workshops such a tool is indispensable, but will be a good help and in the repair and home improvement.

How to choose such a device correctly? To help you with this question, we have compiled a rating of the best trimmers for you.

The selection of models was based on performance, reliability, adequacy of pricing policy.

Consumer reviews and expert opinion were taken into account.

Here are only the best models in the price/quality ratio.

Rating of TOP 15 best sliding compound mitre saws 2021-2022

Place Name Price
Top 5 best sliding compound mitre saws in terms of price, quality and reliability in 2021-2022
1 Metabo KGS 216 M See price
2 Metabo KGS 254 M You can find out the price of
3 BOSCH GCM 800 SJ Check out the price
4 BOSCH GCM 8 SJL You can find out the price of
5 Metabo KGS 305 M Find out the price
Top 5 best inexpensive mitre saws with broach
1 ZUBR ZPT-255-1800 PL Ask the price
2 BLACK+DECKER BES700-QS Learn the price
3 KALIBR PTE-1900/255PRm Learn more about
4 ZUBR ZPT-210-1600 PL Learn the price
5 Einhel TC-SM 2131 Dual Learn the price
Top 5 best professional mitre saws with broach
1 BOSCH GCM 12 GDL Check out the price
2 BOSCH GCM 8 SDE Check out the price
3 Metabo KGS 315 Plus You can find out the price of
4 Makita LS1219L Check out the price of
5 Metabo KGS 254 I Plus Find out how much more

How to choose a crosscut saw with a broach?

When choosing a saw, you should pay attention to the following:

  • broach width - The larger it is, the wider the workpiece becomes "over the shoulder" of the device;
  • cutting depth - determines the thickness of the workpieces;
  • rotary design - in most models, the angle varies from 45 to 57 degrees, but there are versions with larger angles, mostly professional ones;
  • sole quality - stamped with time will come apart, it is better to give preference to the cast ones;
  • stop - the higher it is, the easier to work;
  • the width of the groove under the disk - the parameter depends on how good the quality of the work will be. With a width of up to 1 cm on a cut will be less chips and sawdust.

2

Top 5 best sliding compound mitre saws by price, quality and reliability in 2021-2022

Metabo KGS 216 M

Classic mitre saw is suitable for beginners and hobbyists as well as for 2professional use.

Not only the bright LED backlight and laser pointer, but also the dimensions of the kerf, the large number of settings, and the ease of use ensure high precision.

Ergonomics are enhanced by the design features that keep all the controls within the operator's field of vision.

The tool is equipped with sliding reamers, a collector for dust and chips, the ability to connect a vacuum cleaner for a cleaner workplace.

The disadvantages of users allocate a tight mechanism for turning the angle and a small volume of the complete bag of the vacuum cleaner.

Technical specifications:

  • Construction type: table-top;
  • Cutting height/width: 65/305 mm;
  • Diameter blade/seating hole: 216/30mm;
  • Tilt/turn angle: 47/47 degrees;
  • Cutting speed: 57 m/s.

Pros

  • laser marker;
  • backlight;
  • long warranty;
  • equipment;
  • build quality.

Cons

  • noisy;
  • small bag for chips.

Metabo KGS 254 M

Powerful tool for domestic construction and carpentry work. 2Sufficient number of functions, which brings the saw into the category of semi-professional.

Durable and robust construction is achieved due to the aluminum housing, quality assembly and components. Despite the fact that the saws are made in China, the production is checked for quality by European standards.

High speed is achieved by the number of revolutions and engine power.

Ergonomics of the device is guaranteed by the bright laser pointer, LED backlighting of the working area and overall design characteristics.

Spindle lock for safe operation. Powerful dust canister with the ability to connect a vacuum cleaner will keep the workplace clean.

Specifications:

  • Construction type: table-top;
  • Cutting height/width: 92/305 mm;
  • Disc diameter/seat hole: 254/30 mm;
  • Tilt/turn angle: 47/47 degrees;
  • Cutting speed: 60 m/s.

Pros

  • laser pointer;
  • equipment;
  • power;
  • cutting depth adjustment.

Cons

  • high price.

BOSCH GCM 800 SJ

One of the best saws in the price range and performance. The saw 3This utility class saw has a wide range of features and can be used in small carpentry workshops as well.

The advantage of this model is its design - the drive is equipped with double electric insulation, allowing to work indoors and in conditions with high humidity..

The saw blades are easy and time-saving to change.

The saw copes well with both hard and tough wood at different angles.

Equipped with a dust extraction system, but users note its imperfection - dust and chips fly by and contaminate the work space.

Specifications:

  • Construction type: table-top;
  • Cutting height/width: 70/270 mm;
  • Disc diameter/seating hole: 216/30 mm;
  • Tilt/turn angle: 45/47 degrees;
  • Cutting speed: 57 m/s.

Pros

  • double electric insulation;
  • performance.

Cons:

  • scarce equipment;
  • imperfect removal of working debris.

BOSCH GCM 8 SJL

Semi-professional tool of the famous German manufacturer is designed for 2Processing of parts with a small cross section..

Saw is capable of working not only with wood but also with metal and a variety of plastics.

The small diameter of the saw blade does not interfere with the speed and functionality of the tool.

Depth limiter, work table extensions, and a two-point dust exhaust system are additional comfort features that keep the work area clean and free from distraction by sweeping away chips and dust.

Specifications:

  • Construction type: table-top;
  • Cutting height/width: 70/312 mm;
  • Disc diameter/seating hole: 216/30 mm;
  • Tilt/turn angle: 47/60 degrees;
  • Cutting speed: 62 m/s.

Pros

  • laser marker;
  • groove depth limiter;
  • Two-point chip and dust removal;
  • clamp for fixing the workpiece.

Disadvantages

  • poor equipment.

Metabo KGS 305 M

All-purpose crosscut saw has high power and speed. 3of power, speed and a wide range of functions, so that it belongs to the semi-professional tool.

Low-wear circular saw blade does not need long sharpening and is able to work with different types of wood, plastic and metal.

Can work both in stationary and manual mode, which advantageously distinguishes the saw from other options.

Non-standard workpieces can be fixed using special clamps, and the stability is increased by special side stops.

Ergonomics are represented by a bright laser marker, LED illumination of the working area, and a soft start system. Built-in dust canister is designed for a large volume of debris, and when the vacuum cleaner is connected, debris is practically eliminated from the work surface.

Technical characteristics:

  • Construction type: table;
  • Cutting height/width: 105/305 mm;
  • Circle diameter/seating hole: 305/30 mm;
  • Tilt/turn angle: 47/47 degrees;
  • Cutting speed: 60 m/s.

Pros

  • soft start;
  • backlight and laser pointer;
  • side stops and latches;
  • stop for transverse and longitudinal grooves.

Cons

  • high noise level.

Top 5 best inexpensive crosscut saws with broach

ZUBR ZPT-255-1800 PL

Trimming saw made in Russia, which allows you to work not only with wood, but 3but also with aluminum and plastic.

It has the functions of a circular saw, allows you to cut the workpieces in length, for which it is equipped with a special working table, located at a different level in relation to the trimming.

The pulling table allows to cut various workpieces over 30 cm in width..

The speed of work is achieved by the power and the high number of revolutions.

Dust extraction function is present, but during operations, chips fly to the guides, it is necessary to remove them regularly, which slows down the work.

Technical characteristics:

  • Construction type: table-top;
  • Cutting height/width: 90/305 mm;
  • Disc diameter/seating hole: 255/30 mm;
  • Tilt/turn angle: 45/47 degrees;
  • Cutting speed: 55 m/s.

Pros

  • laser pointer;
  • table extension in both directions;
  • power;
  • circular saw functions.

Cons

  • shavings fly onto the guide rails during operation;
  • Weak light from the laser pointer.

BLACK+DECKER BES700-QS

Classic table saw for household use. The peculiarity of the model is 3The absence of a laser marker and the location of the backlight - it is such that it sets the sawing direction with the shadow of the disk itself.

This is partly both a plus and a minus - the laser guide can go astray, while the natural shadow cannot be disrupted.

All modern features are present - tilt angles, cutting depth adjustment.

All supporting elements are made of cast parts, due to which high reliability of the device is ensured.

Technical characteristics:

  • Construction type: table type;
  • Cutting height: 62 mm;
  • Diameter of a disk: 216 mm;
  • Angle of inclination: 45 degrees;
  • Cutting speed: 50 m/s.

Advantages

  • Cutting direction is set by the shade;
  • functionality;
  • it is easy to replace the disk.

Cons:

  • no laser marker.

KALIBR PTE-1900/255PRm

Excellent tool for carpentry work. Equipped with a powerful collector motor, 4provides high speed of rotation.

The laser marker and time limiter increase the accuracy of the workpiece.

A special feature of the model is that the saw can even work with wood. The rich equipment becomes a pleasant bonus - the saw comes with a set of brushes, a clamp, and a dust bag.

The maximum kerf here is small, but enough for most jobs. Will be a great help in the household needs, as well as for a small carpentry workshop.

Technical Features:

  • Construction type: table saw;
  • Cutting height/width: 72/300 mm;
  • Diameter of a disk/seating hole: 255/30 mm;
  • Tilt/turn angle: 45/45 degrees;
  • Cutting speed: 55 m/s.

Pros

  • laser marker;
  • equipment;
  • powerful motor;
  • reliability of the assembly.

Cons

  • no soft start.

BZUR ZPT-210-1600 PL.

The compact single-speed tool, which allows to cope with different sizes of workpieces. 5size.

Equipped with a table to secure the unit, the cutting head can easily be tilted to the right and left as needed.

Sharp disc handles workpieces up to 60 mm thick well.

The laser line will allow to guide the cutting elements precisely.

Power parameters and cutting elements allow to work not only with wood but also with thin-walled metal and plastic materials.

No chips at the output, easy to install and transport. Quite low noise level in comparison to most models.

Technical specifications:

  • Construction type: table;
  • Cutting height/width: 70/220 mm;
  • Diameter of a disk/seat hole: 210/30 mm;
  • Tilt/turn angle: 45/45 degrees;
  • Cutting speed: 60 m/s.

Pros

  • laser marker;
  • easy to install and transport;
  • power;
  • cut quality.

Cons

  • Removes dust and sawdust slowly.

Einhel TC-SM 2131 Dual

The compact and sufficiently lightweight mitre saw is ideal for cutting fence 5Boards, beams, cladding work.

Ideal for rough work without perfect sizing. Equipped with a good motor, giving high torque speed.

Accuracy is ensured by the laser marker, but it can become clogged with dust during work, so it must be wiped down from time to time.

The dust canister included in the package deals well with coarse debris, but fine dust is easily dispersed, contaminating the work surface, for cleanliness it is recommended to connect a vacuum cleaner.

Technical specifications:

  • Construction type: tabletop;
  • Cutting height/width: 62/310 mm;
  • Diameter of a disk/seating hole: 210/30 mm;
  • Tilt/turn angle: 45/45 degrees;
  • Cutting speed: 60 m/s.

Pros

  • laser marker;
  • easy to set up and install;
  • optimal height and width of cut;
  • easy to maintain.

Cons

  • the laser marker gets clogged with dust;
  • suitable for rough jobs.

Top 5 best professional mitre saws with broach

BOSCH GCM 12 GDL

Stationary saw with high power and speed of torque. It has a high 6High capacity, it can easily handle big amounts of sawing jobs.

It can cut through wood, metal and plastic without much effort.

Reliable fixation of the workpieces is provided by stop profiles and the screw clamp.. Long workpieces can be processed using telescopic supports.

The adjustment and setting up of the saw is very easy thanks to the clear controls and instructions..

Wide range of functions allows the saw to be used not only in private households, but also in small workshops.

Technical characteristics:

  • Construction type: table saw;
  • Cutting height/width: 104/341 mm;
  • Circle diameter/seating hole: 305/30 mm;
  • Tilt angle/swivel: 47/60 degrees;
  • Cutting speed: 60 m/s.

Pros

  • clean cut
  • power;
  • reasonable cost;
  • telescopic supports for long workpieces.

Cons

  • meager equipment.

BOSCH GCM 8 SDE

Professional tool for cross and rip sawing of blanks made of 3wood.

Powerful engine and qualitative saw blade grinding allows to cut any kind of wood.

Saw blade can be easily tilted and precise protractors for angle setting are available.

Saw's lower cover removes automatically, providing greater safety to the operator.

Sawdust is cleaned with connected vacuum cleaner. Ergonomics is provided by the convenient handle in the form of a gun, the start button is wide, it is clamped at once by several fingers.

Technical characteristics:

  • Construction type: table-top;
  • Cutting height/width: 70/312 mm;
  • Diameter disc/seating hole: 216/30 mm;
  • Tilt/turn angle: 60/47 degrees;
  • Cutting speed: 55 m/s.

Pros of

  • laser pointer;
  • equipment;
  • power;
  • cutting depth adjustment.

Cons

  • poor delivery set;
  • no dust bag.

Metabo KGS 315 Plus

One of the best crosscut saws with a broach. The special design allows infinitely 6Combined with a sharp cutting element and high power, the tool can handle a variety of materials, including metal.

Dedicated attention to the quality of the dust bag - the two-point vacuuming system guarantees a minimum amount of dust and shavings on the workplace.

When two vacuum cleaners are connected, debris during sawing is practically eliminated.

Not suitable for professional use due to the low precision of the scale markings.

Technical features:

  • Construction type: table saw;
  • Cutting height/width: 120/320 mm;
  • Diameter of a disk/seating hole: 315/30 mm;
  • Tilt/turn angle: 47/60 degrees;
  • Cutting speed: 67 m/s.

Pros

  • laser marker;
  • infinitely variable speed control;
  • performance.

Disadvantages

  • Low precision in marking the scales.

Makita LS1219L

Table saw of high power refers to the semi-professional tool. 8The feature of the model is the ability to set the side of the laser marker - it can go either to the right or to the left side of the disc.

Drawing is realized in the way that guides are moved forward, so nothing moves back, which allows you to put it almost flush to the wall.

The table extenders are available to work with non-standard workpieces.

Turning can be done with or without angle fixation. It is possible to fix the saw for transport.

Technical characteristics:

  • Construction type: table;
  • Cutting height/width: 107/363 mm;
  • Disc diameter/seating hole: 305/25.4mm;
  • Tilt angle/swivel: 48/60 degrees;
  • Cutting speed: 69 m/s.

Pros

  • laser pointer on either side of the disc;
  • tractor fixation;
  • power;
  • soft start.

Disadvantages

  • Non-standard diameter of insertion hole;
  • cost.

Metabo KGS 254 I Plus

One of the best and newest models of crosscut saws. The main advantage is the asynchronous 8drive, a powerful motor and improved ergonomics.

The first one converts electrical energy into mechanical energy, due to which the noise level is low, and the mechanism itself lasts much longer..

Equipped with depth of cut adjustment, bright laser pointer and precise scale.

Cleanliness at workplace is ensured by a dust canister with two-point extraction that minimizes dust spreading outside the work area and its direct contamination.

Sturdy stops will not let you move, even under heavy load and when working with hardwood.

Technical features:

  • Design type: manual;
  • Cutting height/width: 90/305 mm;
  • Disc diameter/seat hole: 254/30 mm;
  • Tilt/turn angle: 46/47 degrees;
  • Cutting speed: 62 m/s.

Pros

  • precise scale;
  • ergonomics;
  • motor power;
  • sturdy stops.

Cons

  • heavy.

Saw with broach - what it is and how it works

End saw with a broach is relevant when working with cladding and in the laying of skirting boards and baguettes, as well as in the carving of not wide boards, slats, bars.

The base includes handles with a switch and a working wheel with an electric motor, attached to the base.

On the parallel slats a functional module is mounted, which ensures the free movement of the saw blade directly during the working process.

Thanks to the pulling mechanism, it is possible to work on even the widest boards in one go, without wasting extra time.

Which company should I choose?

The list of leaders includes:

  • Zubr - Russian manufacturer of power tools in the budget segment. There are simple domestic saws as well as professional models for demanding machining.
  • Metabo - German manufacturer supplies semi-professional and professional devices with high build quality, sharp discs, motor power. The main disadvantage is a fairly high cost.
  • Makita - Japanese brand that supplies high-quality and reliable devices with branded components. Many of them are equipped with comfortable tables and a well-thought-out broaching mechanism.
  • Kalibr - is another Russian manufacturer whose trimmers are distinguished by large saw blades, robust construction and reliable workpiece retention. The tool can work with materials of different hardness, including not only different types of wood, but also metal and plastics.

Customer Reviews

{{ reviewsOverall }} / 5 Owner's Rating (2 votes)
Brand/Model Rating
Number of votes
Sort by:

Be the first to leave a review.

User Avatar User Avatar
Verified by
{{{review.rating_title }}}
{{{review.rating_comment | nl2br}}}

Show more
{{ pageNumber+1 }}
Add your review!

Helpful video

From the video you'll get an overview of the best pull-through crosscut saws:

See also:

Leave a reply

Useful picks!

Top 15 best screwdriver bits: ranking 2021-2022...

Top 15 best impact drills: ranking 2021-2022 by...

Top 12 best mini circular saws: ranking 2021-2022...

Kitchen

Electronics

Car