Тop 15 the best submersible pumps: rating in 2021-2022 and which model to choose for dirty / clean water

Submersible pumps are some of the most popular on the market due to their simplicity, reliability and maintainability.

However, not every customer can immediately understand the range of models that are available on today's market. In an effort to help you choose, we have compiled a ranking of submersible pumps for you.

The models are selected based on quality, reliability, performance, and their ratio to cost.

We also took into account the opinions of experts and ordinary users, as well as statistical data from Rosstat. Here you will find only leaders for 2021-2022 in price/quality ratio.

Rating TOP 15 best submersible pumps 2021-2022

Place	Name	Price
TOP 5 best submersible pumps by price, quality and reliability in 2021-2022
1	BELAMOS 3SP 60/1.8 (600 W)
2	Vodolei BCPE 0,5-50U
3	Vodolei BCPE 0,5-40U
4	BELAMOS TF3-40 (550 W)
5	KARCHER BP 1 Barrel (400 W)
Top 5 best submersible pumps for dirty water
1	DZHILEKS Tugunok 140/6 (250 W)
2	ZUBR NG-M1-900 (900 W)
3	KARCHER SP 1 Dirt (250 W)
4	VICHR DN-750 (750 W)
5	KARCHER SP 5 Dirt (500 Watt)
TOP 5 best submersible pumps for clean water
1	VICHR SN-90V (550 W)
2	DJILEX Vodomet PROF 55/50 A df (600 W)
3	BELAMOS TF3-80 (cable 50 m) (1000 W)
4	Vodoley BCPE 0,5-32U (820 W)
5	JILEX Vodomet PROF 40/50 (520 W)

How to choose a submersible pump?

When choosing a submersible pump the following should be taken into account:

• voltage - Drainage models can be operated by single-phase and three-phase power;
• purpose - for hot water special equipment is needed, for water temperature up to +35 ... 40 degrees will be enough standard;
• performance - the volume that will have to be removed is taken into account;
• contamination level - not all drainage pumps can cope with large solid particles or thick masses;
• type of pump - If water intake of clean water is expected, it is worth giving preference to drainage or borehole pumps, and when creating an irrigation system at dachas - special garden pumps.

Top 5 submersible pumps by price, quality and reliability for 2021-2022

BELAMOS 3SP 60/1.8 (600W)

Small borehole pump for operation with clean water without solids and fibres. Can be used in domestic and private water supply systems, waterworks and irrigation systems.

Protected against dry running by intelligent automation.

Durable stainless steel housing with special coating. The hydraulic components are equipped with fiberglass for better performance.

The high energy efficiency is achieved by intelligent housing and electronics..

Soft start reduces wear and prevents hydraulic shock.

Technical specifications:

• Type: borehole;
• Immersion depth: 15 m;
• Flow rate: 1.8 cubic meters per hour;
• Body: stainless steel;
• Installation: vertical.

Vodoley BCPE 0,5-50U

Multistage borehole pump for clean water without fibers and solids. Equipped with floating wheels with tungsten carbide bearings.

Pump for wells is used for water supply of private houses, summer cottages, water stations, can be used for lowering the level of groundwater, irrigation systems. Easy to install due to small weight and diameter.

The filter prevents the suction of coarse impurities in the water.

High-efficiency motor runs on permanent magnets.

The soft-start reduces the risk of water hammer to a minimum.. The well pump is also protected against overload, overheating and voltage fluctuations.

Can operate at undervoltage without an actual power drop. Protected against axial misalignment of the impeller.

Technical features:

• Type: borehole;
• Immersion depth: 8 m;
• Flow capacity: 3.6 cubic meters per hour;
• Body: stainless steel;
• Installation: vertical.

Vodoley BCPE 0,5-40U

Powerful pump for domestic and industrial water supply. The electric motor is equipped with High-quality cooling system and high efficiency.

The temperature indicators are controlled by an electronic unit and the adapted temperature sensor..

With its power the pump for wells is notable for low power consumption.

It can cope with water at up to 50 g/m3 impurities..

The pump can handle an average capacity of 2 cubic metres but can handle up to 3.6 cubic metres with short-duration operation.

Technical characteristics:

• Type: borehole;
• Immersion depth: 8 m;
• Flow capacity: 3.6 cubic meters per hour;
• Body: stainless steel;
• Installation: vertical.

BELAMOS TF3-40 (550 W)

Reliable wear-resistant borehole pump for deep wells. Built-in protection Prevents dry-running.

Equipped with a soft start that virtually eliminates hydraulic shock.

Check valve prevents water flow and drop in head.

Stainless steel pump casing with high corrosion resistant properties.

Can be used in irrigation and circulation industrial systems, domestic water supply and drainage systems to lower the water table.

Not demanding to the water - it can pump both potable and brackish water, as well as sea water without solid and fibrous particles.

Technical characteristics:

• Type: borehole-type;
• Immersion depth: 80 m;
• Flow capacity: 2.7 cubic meters per hour;
• Body: stainless steel;
• Installation: vertical.

KARCHER BP 1 Barrel (400 W)

Powerful well pump for the water supply of private houses, irrigation water supply systems, water stations.

An electric single-phase motor will provide high power and efficiency, and is reliable in operation and has a high service life.

Provides one of the highest maximum head and flow rates. Shatterproof plastic housing is resistant to temperature fluctuations.

Can be installed both vertically and horizontally. Suitable for residential and industrial use.

Also suitable for domestic and industrial use.:

• Type: sump type;
• Immersion depth: 7 м;
• Flow capacity: 3.8 cubic meters per hour;
• Body: plastic;
• Installation: vertical.

Top 5 best submersible pumps for dirty water

DZHILEKS Tugunok 140/6 (250 W)

A small but powerful pump for pumping liquids from wells, tanks, flooded It is also suitable for pumping ground and waste water..

The well pump is suitable for handling liquid constituents in septic tanks and pits. Passes particles with a diameter of no more than 32 mm. Not equipped with a knife, does not cope well with thick masses.

Easy to maintain and operate, due to its low weight it is easy to move and redirect the device if needed.

Easy to disassemble without special tools, so repairable by own efforts. Features low power consumption and noise level.

Technical specifications:

• Immersion depth: 8 m
• Flow rate: 8.4 cubic meters per hour;
• Body: plastic;
• installation: vertical.

ZUBR NPG-M1-900 (900 W)

Powerful pump that can be used for both dirty and clean water. It has Excellent performance, pumping capacity and a long service life.

It is protected from breakdowns by the classic float system and overheating protection.

For its cost is able to dive to a depth of no more than 7 meters, which for most operations will be more than enough..

It is notable for simplicity of operation and design, repairable by own forces. An excellent solution for drainage systems, aeration, water intake from wells and reservoirs.

Specifications:

• Type: drainage;
• Immersion depth: 7 м;
• Flow capacity: 13.8 cubic meters per hour;
• Body: plastic;
• installation: vertical.

KARCHER SP 1 Dirt (250 W)

Reliable and quality pump with a small capacity designed mainly for Mainly for draining tanks and swimming pools.

Passes particles up to 2 cm in diameter. Equipped with an ergonomic handle for easy transportation and carrying when needed.

Can be used to dehumidify basements and rooms, leaving no more than 1mm of water behind.

Hose for drainage, adapter with non-return valve and fittings are not included, you will have to buy them separately.

Pump can be used to pump clear water into containers in gardens, orchards and bath houses..

The pump does not need much maintenance, to keep it working it is enough to wash the sponge filter a few times a month.

Specifications:

• Type: drainage;
• Immersion depth: 7 м;
• Capacity: 5,5 cubic meters per hour;
• Body: plastic;
• installation: vertical.

VICHR DN-750 (750 W).

An indispensable pump for pumping water from flooded basements, cellars, cellars and caves.

The pump has an excellent power, overheat protection and good pumping ability, equipped with a classic float system.

Can also be used as a unit in irrigation systems, for cleaning and draining tanks, also with non-aggressive liquids.

It can also be used to remove liquid from septic tanks and pits, but please note that the pump does not have a blade.

Works in the presence of solid fractions with a diameter not exceeding 3.5 cm in the water, and the temperature of the liquid must not exceed 35 degrees.

Technical specifications:

• Type: drainage;
• Immersion depth: 8 m;
• Capacity: 15,3 cubic meters per hour;
• Body: plastic;
• installation: vertical.

KARCHER SP 5 Dirt (500W)

Excellent drainage pump with good equipment - comes with float retainer The float retainer, ceramic O-ring, quick disconnect nozzle and hoses will have to be bought separately..

However, hoses and hoses must be purchased separately if necessary. Economical and reliable unit for country house or home.

Makes a minimum of noise when working.

The pressure is not the highest, it is useful only for diverting water or filling tanks for irrigation is not suitable.

But qualitatively removes water from the septic tank. Is present manual mode to maintain a minimum level of humidity.

Technical specifications:

• Type: drainage;
• Immersion depth: 7 м;
• Capacity: 9,5 cubic meters per hour;
• Body: plastic;
• installation: vertical.

Top 5 best submersible pumps for clean water

VICHR SN-90V (550 W)

Submersible vertical well pump made in Russia.. Equipped with a built-in Equipped with a built-in perforated filter, detaining particles over 1 mm in size, a float-type switch, a check valve.

Directly the body is made of plastic materials.

Operates in automatic mode via a flow and pressure switch. At a submergence of up to 35 m is capable of delivering a head of up to 90.0 m. Capable of working with water temperatures up to +35 degrees.

The pump for wells has a high corrosion resistance and reliability. Protected from the thermal load with an automatic restart. Works relatively quietly, easy to install and operate.

Technical characteristics:

• Type: borehole;
• Immersion depth: 35 м;
• Flow rate: 1.5 cubic meters per hour;
• Body: stainless steel;
• Installation: vertical.

JILEX Vodomet PROF 55/50 A df (600 W)

Functional well pump of high-quality assembly. Equipped with a reliable control Automatics, protection against overheating and idle running.

It switches on and off automatically at excessive pressure rise and drop.

Built-in relays allow maximum flexibility and quiet operation..

With a hydraulic accumulator, a complete pumping station can be obtained. The float switch is optimal for shallow wells.

Automatic restart on water ingress. Inlet strainer made of stainless steel.

Technical data:

• Type: well;
• Immersion depth: 30 м;
• Flow capacity: 3.3 cubic meters per hour;
• Body: stainless steel;
• Installation: vertical.

BELAMOS TF3-80 (cable 50 m) (1000 W)

Reliable and high-quality borehole pump with the possibility of connecting hydroaccumulator, which allows you to create a real pumping station.

Excellently shows itself in work at the expense of the built in automatics, high quality of accessories and the case.

The pump for wells is simple to install - it is enough to connect power and dip the housing into the water, after which the pump will automatically build up the necessary pressure in the intake pipe and stop.

Protected against overheating, dry run, the float switch will automatically shut off the pump at a fall of water level and restart the unit at the inflow of water.

Technical characteristics:

• Type: borehole pump;
• Immersion depth: 80 m;
• Pumping capacity: 2.7 cubic meters per hour;
• Body: plastic;
• Installation: vertical.

Vodolei BCPE 0,5-32U (820 W)

Productive well pump with the ability to submerge to a depth of 12 m. Equipped with Stainless steel perforated filter for separation of fractions larger than 1 mm.

Float switch makes operation of the pump fully automatic, in addition to protection against idle running.

A non-return valve is also available. Capable of providing the head up to 35 m. Operates at ambient temperatures from +1 to +35 degrees Celsius.

Rugged plastic housing is resistant to temperature fluctuations and external influences.

The manufacturer is confident in its technology - according to the documentation the life of the pump is 10 years.

Easy to carry, install and maintain, in addition, the device has a long mains cord.

Specifications:

• Type: borehole pump;
• Immersion depth: 12 m;
• Flow rate: 3.6 cubic meters per hour;
• Body: stainless steel;
• Installation: vertical.

JILEX Vodomet PROF 40/50 (520 W)

One of the best pumps for wells is designed to work with clean water. Provides head up to 50 m from a depth of up to 30 m.

It can be used as a pumping station for deep reservoirs.

Equipped with stainless steel strainer, which prevents fractions larger than 1 mm in diameter..

Resistant to corrosion, has a long service life

Plastic housing is resistant to temperature fluctuations, but it is not recommended for use in the cold and at temperatures above +50 degrees.

Additionally equipped with a flow sensor and non-return valve, works "out of the box" - does not need additional pumping and setting.

Technical specifications:

• Type: borehole;
• Immersion depth: 30 м;
• Flow capacity: 2.4 cubic meters / hour;
• Body: plastic;
• Installation: vertical.

What company to choose?

The market allows you to choose a variety of models for different needs.

But among the many firms that provide supply, the leading experts call:

• Dzileks - A leading Russian company that has been in the market for more than 20 years. It supplies equipment for professional and domestic use, adapted to the conditions of operation in Russia. The advantage of the company is a wide network of branches and service centers;
• Grundfos - A large manufacturer from Denmark. Models are very expensive, but are distinguished by the quality of work, head, efficiency and reliability. Ceramic and stainless steel models last for decades. The disadvantage - expensive and complicated repair in case of breakage;
• Karcher - German brand with a good reputation. Despite the fact that it mainly supplies garden equipment and power tools, the line of units also includes pumps and pumping stations. They are distinguished by quality assembly, excellent reliability and reasonable cost, for which they are very appreciated by Russian consumers;
• Zubr - is another Russian manufacturer with a wide range of inexpensive pumps of different types and purposes. This brand is distinguished by an innovative approach to the development of its units, a wide network of service centers and sales centers;
• Vortex - is a recognized leader in production of various pumping equipment. The pump stations and borehole models are notable for quality and reliability as they are a priority in the company's development;
• Belamos - Despite its "English-speaking" name, the brand is of Russian origin. It produces equipment for heating and water supply systems, including submersible pumps. Originally a small exporter firm has turned into one of the largest manufacturers in the Russian market.

Types of submersible pumps?

The following types are distinguished:

• garden - for the organization of irrigation and water supply on small plots, in private homes from wells, wells and natural reservoirs;
• wells - withstand serious levels of immersion and guarantee the head up to the second or third floor;
• drainage - for pumping rain water, melting water, contaminated water, do not require cleanliness of the pumped liquid;
• fecal - designed specifically for pumping sewage and fecal mass, often equipped with blades.

Customer reviews

Helpful video

From the video you will get an overview of the best submersible pumps: