TOP 15 best aluminum radiators: rating 2021-2022 and what to choose for heating your apartment and private home

Aluminum heating radiators are a good alternative to the outdated cast iron radiators.

They are lightweight, inexpensive and attractive in appearance.

In addition, aluminum has a high heat output, so radiators made of this metal contribute to the rapid heating of the room.

Rating TOP 15 best aluminum radiators 2021-2022

Location	Name	Price
TOP 5 best aluminum radiators for a private house in price/quality ratio
1	Royal Thermo Revolution 500	Check price
2	ROMMER Profi AL 350	Learn the price
3	Oasis AI 500/96	Learn the price
4	Royal Thermo Revolution 500 x 8	Learn more about the price
5	Royal Thermo Indigo 500	Learn the price
Top 5 best aluminum radiators with side connection
1	ROMMER AI Plus 200	Learn the price
2	Royal Thermo Revolution 350	Learn more about the price
3	Royal Thermo DreamLiner 500	Learn the price
4	Rifar Alum 500	Learn more about the price
5	Global VOX R 500	Learn the price
Top 5 best aluminum radiators with bottom connection
1	Rifar Alum Ventil 500	Learn the price
2	Rifar Alum Ventil 350	Learn the price
3	Rifar Alum Ventil 500 x 5	Check out the price
4	Rifar Alum Ventil 350 x 13	Check out the price
5	Rifar Alum Ventil 350 x 11	Check price

How to choose and what to look for?

Many companies are engaged in the production of heating devices made of aluminum, but when choosing a device, you should pay attention not to the brand, but to the technical characteristics of the product.

To choose a quality aluminum battery will help the following recommendations:

1. By design, it is better to give preference to a cast radiator. It is much better able to withstand pressure fluctuations in the system and can work in any conditions.
2. Attention should be paid to the internal coating of the product. Reliable manufacturers process the inside of the radiator with a special compound that forms an oxide film on the surface and protects the unit from corrosion.
3. It is desirable to buy a radiator assembled and with the right number of sections - Since the factory twist is usually more reliable than the one made by yourself.
4. It is better to give preference to European manufacturers. Their devices are of high quality, and no toxic compounds are used for production. Chinese devices have no such guarantees.

It is also advisable to buy the device at a specialized store of heating equipment, not at the market.

This way the buyer will be protected from buying a fake.

The best aluminum radiators for a private home in the price/quality ratio

Aluminum radiators can be installed in apartment buildings, as well as in private homes. For individual heating systems, you can choose a high-quality, and relatively inexpensive device.

Royal Thermo Revolution 500

Sectional aluminum radiator, designed for wall mounting. Connection to the heating system is side-mounted, there are no difficulties with installation of the device.

The radiator is made of cast aluminum, so it can withstand water hammer and pressure surges within 30 bar.

Depending on the model, the device may consist of 1-22 sections, but it is better to buy an assembled radiator, focusing on the area of the room.

Mounting kit together with the heater is not provided, so all the additional elements required for installation will have to buy separately.

Technical characteristics:

• Heat output 181-3982 W;
• the working temperature of 110 degrees;
• maximum working pressure of 20 bar;
• weight 1.2-26.4 kg;
• section dimensions (W/H/T) 80x570x80 mm.

ROMMER Profi AL 350

Simple in appearance, but functional aluminum radiator that is suitable for individual heating.

The device is compact and features a concise design, so it will fit harmoniously into any interior.

The sectional design of the radiator allows you to choose the model according to the area of the room.

The product is completely made of aluminum, and the quality internal coating and exterior painting prevent the formation of rust and leaks.

The maximum working pressure is 16 bar, but the unit can withstand pressure peaks of up to 24 bar.

The connection is lateral, but the mounting kit is not provided with the radiator, so the necessary parts to install the radiator will have to buy separately.

Technical characteristics:

• power 135-2700 W;
• operating temperature 110 degrees;
• number of sections 1-20;
• weight 0.8-16 kg;
• Section dimensions (W/H/T) 80x428x80 mm.

Oasis AI 500/96

Light-weight and functional radiator designed for installation in detached houses or apartments with individual heating systems.

The casing is made of aluminium and the high-quality painting and special internal coating prevents the formation of rust.

Working pressure of the radiator is 16 bar, but due to the well-thought-out construction and quality materials the heater successfully withstands pressure jumps up to 24 bar without loss of performance.

Users praise the high heat output of the device.

In addition, the body provides a rotary knob, which allows with one movement to adjust the temperature in the room.

Technical characteristics:

• Operating temperature 110 degrees;
• Number of sections 4-12;
• power 532-1596 W;
• weight 3,4-10,2 kg;
• Section dimensions 75x560x96 mm.

Royal Thermo Revolution 500 x 8

High-quality aluminum radiator with a standard number of sections Suitable for heating of medium size living spaces.

Body is made according to casting technology of high quality aluminum. A special internal coating prevents the formation of rust, and a thick layer of paint on the outside of the device provides long-term operation and protection against leaks.

Radiator can be installed in private houses with individual heating, and in multi-storey buildings with connection to the central heating system.

The unit is designed to withstand operating pressures of 20 bar and pressure surges of up to 30 bar.

Technical characteristics:

• power 1368 W;
• Number of sections 8;
• working temperature 110 degrees;
• weight 9.6 kg;
• Section dimensions (W/H/T) 80x570x80 mm.

Royal Thermo Indigo 500

The radiator of a well-known European brand is distinguished by its high quality workmanship and well-thought-out construction.

The device refers to the sectional type, so the number of elements can be increased individually, focusing on the area of the room.

The aluminum housing is reliably protected against rust, thanks to a special internal coating and quality painting on the outside.

The device is recommended for installation in private homes with individual heating system.

But the radiator can withstand operating pressure of 20 bar and surges up to 30 bar, so it can be installed in apartment buildings with a centralized heating system.

Technical characteristics:

• heat output 195-2730 W
• operating temperature 110 degrees;
• Number of sections 1-14;
• weight 1,35-18,9 kg;
• Section dimensions (W/H/T) 80x585x100 mm.

The best aluminum radiators with side connection

Lateral connection of the radiator is standard in many apartments and houses, so many models have this design. The choice of radiators with side connection is rich, but there are models that stand out from the rest.

ROMMER AI Plus 200

This model of aluminum radiator will suit those who appreciate quality, compactness and functionality.

The device is designed for wall mounting and side connection to the heating system.

But the design features suggest using the radiator only with individual, not centralized heating systems.

Working pressure of the device is 14 bar, but short-term increase of this indicator up to 21 bar is allowed.

The number of sections can be selected individually, depending on the area of the room, but it is better to buy a ready-made device with a certain number of sections, as the factory connection is more reliable than manual.

Technical Specifications:

• operating temperature 110 degrees;
• power 120-2400 W;
• Number of sections 1-20;
• weight 0,6-13,4 kg;
• Section dimensions (W/H/T) 80x276x96 mm.

Royal Thermo Revolution 350

Radiator of a well-known European brand is distinguished by restrained design and thoughtful construction.

In conjunction with the affordable price and functionality, this makes the device one of the best for installation in private houses and apartments of multi-storey houses.

The body of the device is made of high quality aluminum, and a special internal coating protects the device from corrosion.

The outside of the radiator is painted with heat-resistant paint, which does not turn yellow and does not crack under the influence of high temperatures.

On the side of the housing there is a convenient rotary knob that allows you to adjust the temperature in the room.

Technical characteristics:

• heat output 141-1974 W;
• working pressure 20 bar;
• operating temperature 110 degrees;
• weight 1-14.1 kg;
• dimensions (W/H/T) 80x420x80 mm.

Royal Thermo DreamLiner 500

A stylish aluminum radiator with an original design and excellent performance.

The device is designed for side connection, so there are no problems with installation of the radiator. But you should keep in mind that the installation kit is not included, so the brackets and other necessary accessories will have to buy separately.

The design of the heater allows you to connect it to individual and centralized heating systems.

Working pressure is 20 bar, but the high quality assembly ensures reliable protection of the device from water hammer and pressure surges within 30 bar.

Technical characteristics:

• heat output 113-1592 W;
• operating temperature 110 degrees;
• Number of sections 1-14;
• weight 1,3-18,3 kg;
• Section dimensions (W/H/T) 80x580x87 mm.

Rifar Alum 500

Easy to use and reliable aluminum radiator of domestic production Especially adapted for installation in multi-storey buildings.

Durable aluminum housing outside painted with heat-resistant paint, and inside treated with a special compound against corrosion.

Together with a robust design, this enables the unit to withstand operating pressures of 20 bar, as well as water hammer and short-term pressure rises up to 30 bar.

The lightweight housing and compact dimensions facilitate transportation and installation of the device.

But it should be borne in mind that the installation kit is not included, so the brackets and other accessories will have to buy additionally.

Technical characteristics:

• heat output 183-2928 W;
• operating temperature of 135 degrees;
• Number of sections 1-16;
• weight 1,4-23,2 kg;
• Section dimensions (W/H/T) 80x565x90 mm.

Global VOX R 500

The sectional aluminum radiator is designed for wall mounting and side connection.

Design of the heater is ascetic and restrained, so the device will fit harmoniously into any interior.

The body is made of high quality aluminum, and the interior is coated with a special composition that prevents corrosion.

The heater is more suitable for private homes or apartments with individual heating, as the working pressure of 16 bar is not enough to connect to the central heating system.

The unit is, however, able to withstand water hammer and short-term pressure jumps of up to 24 bar.

The exterior of the housing is painted with heat-resistant paint, and is equipped with a convenient rotary knob that allows you to adjust the room temperature.

Technical specifications:

• heat output 127-2540 W;
• operating temperature 110 degrees;
• Number of sections 1-20;
• weight 1,4-29 kg;
• Section dimensions (W/H/T) 80x590x95 mm.

The best aluminum radiators with bottom connection

Bottom-connected radiators are not available in all homes, but the choice of heating devices with this function is quite wide. Most users give preference to domestic devices.

Rifar Alum Ventil 500

Compact, inexpensive, but reliable aluminum radiator, adapted for For use with domestic heating systems.

Since the case is made entirely of aluminum, the radiator weight is light, which makes it easy to transport and install.

The exterior of the housing has a special protective coating against rust. The top of the device is completely covered with heat-resistant paint, which does not crack or turn yellow even after several years of operation.

The radiator belongs to the sectional devices, so the number of sections can be selected individually, focusing on the area of the room.

Working pressure of the device is 20 bar, so it can be connected to both individual and central heating system.

Technical characteristics:

• heat output 183-2928 W;
• operating temperature of 135 degrees;
• Number of sections 1-16;
• weight 1,4-23,2 kg;
• Section dimensions (W/H/T) 80x565x90 mm.

Rifar Alum Ventil 350

Domestic radiator is characterized by ease of operation, reliability and thoughtful construction.

Durable and lightweight aluminum housing is covered with a special anti-corrosion composition, so the failure of the device or leaks are excluded.

On the side of the case is a regulator, with which the user can adjust the temperature in the room independently.

The design of the device is universal, and the convenient bottom connection allows you to mount the radiator even under a low window sill.

High heat output and optimal distribution of hot air ensure a long retention of temperature and fast heating of the room.

Technical characteristics:

• heat output 153-2448 W
• operating temperature of 135 degrees;
• Number of sections 1-16;
• weight 1,2-19,2 kg;
• section dimensions (W/H/T) 80x415x90 mm.

Rifar Alum Ventil 500 x 5

Functional and well-thought-out model of aluminum radiator with 5 sections. High heat output and operating temperature provides fast heating of the room, but the limited number of sections allows you to install the device only in small and medium-sized rooms.

Durable housing made of high quality aluminum can successfully withstand water hammer and pressure surges up to 30 bar.

The inside of the housing is coated with a special chemical that prevents corrosion and guarantees protection against leaks.

Users also praise the design of the device, which makes the radiator suitable for installation in residential, office and other areas.

Technical characteristics:

• heat output 915 W;
• operating temperature of 135 degrees;
• working pressure of 20 bar;
• weight 7.2 kg;
• dimensions (W/H/T) 80x400x90 mm.

Rifar Alum Ventil 350 x 13

Powerful and functional radiator, with which you can heat even large rooms.

Made of light but strong aluminium. The inside of the body is coated with a protective composition that prevents the formation of rust and leakage of the device.

In addition, there is a rotary knob on the housing that allows the user to adjust the room temperature independently.

The outer layer of paint is very durable, so it does not crack or turn yellow when exposed to high temperatures.

The operating pressure of the device is 20 bar, but the body itself can withstand water hammer and pressure surges up to 30 bar.

Technical specifications:

• heat output 1989 W;
• operating temperature - 135 degrees;
• working pressure 20 bar;
• weight 15.6 kg;
• dimensions (W/H/T) 80x1040x90 mm.

Rifar Alum Ventil 350 x 11

Functional and easy to use aluminum radiator with a standard number of sections.

11 elements of the heater is enough to heat and maintain an optimal temperature even in large rooms.

Another advantage of the device is that the mounting kit is provided in the kit, so the user does not have to buy additional brackets and other fasteners.

The case of lightweight but durable aluminum has a protective coating against rust and is resistant to water hammer, so if the pressure level in the system rises to 30 bar, the device will not fail.

Technical characteristics:

• heat output 1683 W;
• operating temperature of 135 degrees;
• operating pressure 20 bar;
• weight 13.2 kg;
• dimensions (W/H/T) 80x880x90 mm.

Types of aluminum radiators and their brief description

There are a total of three types of aluminum radiators.

They differ in manufacturing technology and have some features:

1. Cast. Such radiators are made by injection molding technology. As a rule, an alloy of aluminum and silicon is used for production. Thanks to this product is characterized by increased strength, resistance to corrosion and excellent heat dissipation.
2. Extrusion. Sections of such radiators are extruded on an extruder under pressure, and then connect them by welding. Some manufacturers in order to save money use composite glue for this purpose. In any case, the probability of leakage of such a radiator is much higher than that of a cast one.
3. Anodized. This is the most expensive type of radiator. Special aluminum of the highest degree of purification with anodic oxidation is used for production. This changes the structure of the metal itself and increases its resistance to corrosion. However, due to the high cost, this type of aluminum radiators is practically not used in everyday life.

Advantages and disadvantages of aluminum radiators

The increased demand for aluminum radiators is due to their many advantages.

The advantages of such heating devices include:

• The ability to withstand high pressure and water hammer. On average, the aluminum radiator is designed for pressure of 20 bar, but most models can withstand short-term pressure surges up to 30 bar. Because of this, such radiators are suitable for installation in apartment buildings.
• The high level of heat dissipation of aluminum contributes to fast and even heating of the room. In addition, the radiators themselves have a special regulator, which allows you to adjust the temperature.
• The low weight of aluminum batteries makes them easy to transport and install. Also, such products have a stylish design, and fit harmoniously into any interior.
• Aluminum radiators come in a huge range of sizes. This allows you to choose a model that is suitable in size and number of sections.

But you can not forget about the disadvantages.

In addition, aluminum is easy to corrode. And if the manufacturer has spared on the inner treatment of the radiator, it is unlikely to avoid leaks.

What company to choose?

Many companies are engaged in the production of aluminum radiators, but the leaders are traditionally considered:

1. Italy. Well-known companies Sira, Ferroli and Global produce stylish products with high-quality heat-resistant coating, which reliably protects the devices from corrosion. Radiators of these brands are well able to withstand pressure differences, but they have a high cost.
2. Russia. The leader among domestic manufacturers of radiators is the company Rifar. Some models of the brand by design and technical characteristics copy the products of the company Global. They cost less than Italian radiators, but they are much better adapted for connection to domestic heating systems.
3. China. The most famous Chinese manufacturers of aluminum radiators are considered Bilux and Konner. Such products are inexpensive and of high quality, but in order not to buy a defective or counterfeit product, you need to buy a radiator only in a specialized store, having previously studied its technical passport.

Steel, copper or aluminum - what to choose?

It is difficult to unequivocally answer the question of which radiator is better, because each device made of a certain metal has its own characteristics, pros and cons.

Objective evaluation of radiators made of a certain type of metal will help to make the right choice:

• Steel devices are more suitable for individual than for centralized heating systems. Such radiators are cheaper than aluminum radiators, have a good heat output and resistance to corrosion. But steel is considered relatively brittle metal and is not able to withstand water hammer with increased pressure up to over 25 bar.
• Copper radiators have excellent performance characteristics. Copper has a high thermal conductivity, so this radiator heats the room twice as fast as aluminum. In addition, the device is resistant to corrosion and water hammer, but the cost of copper radiators is very high, so many users bypass them.
• Aluminum devices have all the necessary characteristics for long-term operation. But in order to ensure that the battery warms the room well and does not leak, you need to buy products from proven manufacturers.

Aluminum or bimetallic - which to choose?

There are also bimetallic radiators on the market. They cost more than aluminum radiators, but they are considered the most modern type of heating device.

In bimetallic radiators, the body is made of aluminum, and the inner part - of stainless steel.

Due to this, the device is characterized by increased resistance to corrosion and provides rapid heating of the room.

If the budget allows, it is better to buy a bimetallic radiator, and if finances are limited - you can install and aluminum, but it must necessarily be of very high quality.

Customer reviews

Useful video

From the video you will learn how to choose an aluminum heating radiator: