Useful information about how to set up a robot vacuum cleaner - overview of functions and getting ready to work

Setting up a robot vacuum cleaner is a way to automate cleaning in the apartment. Like any other equipment, a robot vacuum cleaner consumes electricity and water.

If it runs for a long time without cleaning, it can burn out. To extend the life of the device, it needs to dry clean at least once a week and wet clean once a month.

Before you start cleaning, the vacuum cleaner needs to be set up. Each device has its own parameters to consider when programming it.

What a robot vacuum cleaner consists of and how to prepare it for work

Robot vacuum cleaner on the example of Xiaomi consists of two main parts:

1. Robot module.
2. The control module.

The module of the robot vacuum cleaner is designed as a rectangle with rounded corners, In the upper part of the module has a rectangular hole with a slot in which the fine filter is located.

On the left side of the body there is a waste tray, and on the right side there is a power on/off switch, in the lower part there is a compartment for the battery.

The control module (Wi-Fi module) has the form of a rectangle with a rounded corner, in its upper and lower parts there are power on and power off buttons, button to turn on the "Turbo" mode, as well as on the underside of the housing there is a "Reset" button.

There are 4 touch keys on the robot module, they are used to control the robot vacuum cleaner, Namely, power on, off, moving around the room and cleaning the corners. A special sensor captures objects that are at floor level and does not allow the robot to pass them.

The system then starts looking for a lower level where it can park. It comes with two filters, one for garbage collection and one for air purification.

On the back there is a switch to select the type of cleaning: automatic and manual. It serves to turn on the robot vacuum cleaner. The power button is on the side on the right side. Also, if you press it several times, the automatic cleaning mode is activated.

How to prepare the robot vacuum cleaner for work

• Check that the battery is charged.
• Clean the soleplate from food residue, dust and dirt.
• Turn the unit off and let it cool down before cleaning the new surface.
• Clean the dust canister and collection tank.
• Turn the robot on.
• Wait until it is fully charged.
• Set the cleaning time, speed, and direction.
• After cleaning, turn the device off and wait until it is fully discharged.
• Unplug the unit and rinse all parts under running clean water.
• Wipe clean with a soft cloth and leave to dry in a well-ventilated area.
• Be sure to reinstall the parts.
• Check that it is working correctly.
• Reload the unit.

Preparing the apartment for cleaning with a robot vacuum cleaner

Prepare the apartment for cleaning with a robot vacuum cleaner in advance. First of all, it is necessary to remove all foreign objects from the room, which may prevent the robot to clean the surface. It is necessary to remove everything that can prevent the robot-vacuum cleaner from reaching the place of cleaning.

Once all these objects are removed, the robot should be turned on. Next, the robot vacuum cleaner will do the cleaning.

Wires

For a more thorough cleaning, you should remove all the wires. This is also necessary so that the robot does not get tangled in them. Wipe the floor thoroughly before cleaning. The robot vacuum should not leave behind any traces of dirt.

Wet Debris

Wet debris should be removed before cleaning with a wet cloth or tissue. If you remove it with a wet sponge, it can get wet and prevent the robot from working effectively. When cleaning, make sure that no water gets inside the robot vacuum cleaner.

Cleaning under furniture

In order for the robot to penetrate into hard-to-reach places, you need to move the furniture. Then you should turn the robot on and do the cleaning. You should not forget about the hard-to-reach places.

Large debris

Cleaning large debris before cleaning with a robot vacuum cleaner is necessary in order to collect large pieces of debris such as paper, pieces of cloth, glass shards, and more. Coarse debris can clog the nozzle of the robot vacuum cleaner, which will make it much more difficult to work.

Overcoming obstacles with the robot vacuum cleaner

Before the robot vacuum cleaner starts cleaning, it should walk around the perimeter of the room. This will allow it to see what obstacles it may encounter along the way. Depending on the size of the room, the robot will determine how long it will take to clean. If possible, it is better to remove large objects from the floor beforehand. This way the work of the robot will be more effective.

Robot vacuum cleaner functions

1. Scheduled cleaning

With the smart schedule you can set up regular cleaning that will take place every day at a strictly defined time. With this function you can set the time when the robot vacuum cleaner starts, and set a time interval for the robot to stay near the wall (to avoid obstacles).

2. Dry cleaning

Robotic vacuum cleaner can be used to pick up small debris (dust, pet hair, crumbs, small stones, etc.) and dry cleaning. This significantly increases the efficiency of the device operation.

3. Wet mopping

This method of cleaning allows you to clean surfaces more thoroughly of dirt, dust, and pet hair. When the robot finishes wet cleaning, it returns to the base to recharge the battery.

4. intensive cleaning

When you need to quickly remove a lot of debris in a small area, the intensive cleaning mode is used. It allows you to work without interruption for 15 minutes. In rest mode, the duration of work does not exceed 3 minutes.

Remember to open the trash compartment lid while the unit is running. This will prevent debris from getting stuck in the vacuum during cleaning and will extend the life of the vacuum.

5. Cleaning along walls

Bypassing walls and furniture is an effective way to pick up dirt from walls and corners of the room. The cleaner also senses the boundaries of the work area.

To avoid injury, the device has a built-in laser height sensor that always keeps the distance to the floor surface. The device is controlled via the touch panel on the housing or via a smartphone app.

6. Virtual wall

The presence of this function allows you to avoid the robot falling from a height when cleaning. This is achieved by the fact that before each cleaning cycle the device creates a virtual wall behind itself.

7. Drawing a Floor Plan

A floor plan is needed to draw the shortest possible routes around obstacles. After analyzing the layout of the room, the robot vacuum cleaner develops a route around the obstacle, as well as the path of movement at the point "at the junction" of the rooms. Based on the developed room plan the program forms a three-dimensional model of the room.

8. 8. Return to charging

If necessary, the robot vacuum cleaner returns to the charging station, where it can charge itself. Smart robot vacuum cleaners work on the principle of a closed cycle, due to which it takes about 2 hours to fully charge the battery of the machine.

9. Determining the minimum amount of dust

When the room gets too dirty, the robot vacuum cleaner starts working at a higher intensity. It works continuously and collects dust from the floor surface.

By measuring the amount of dust it collects, you can see when it needs to pause and change direction or even stop.

10. Cleanliness Control

The device is able to detect the cleanliness of the room and move on to the next stage of cleaning. In case of dirt, it automatically shuts off. The device not only cleans the floors, but also works as a smart vacuum cleaner. It can be switched to carpet cleaning or furniture cleaning mode.

Ability to control the vacuum cleaner with a smartphone

The vacuum cleaner can be connected to your smartphone and controlled remotely directly from your phone.

To do this, you need to download a special application on your phone that supports wireless technology. Then connect your vacuum cleaner to Wi-Fi. In the app, you can set up the vacuum cleaner so that it doesn't just clean the rooms, but looks for contaminants to be dealt with on its own.

For example, if you've decided that there's dust in the living room and crumbs in the kitchen, you can set the vacuum cleaner to move around the rooms and clean them itself. And if there is trash on its way, it will return to the place where there is trash.

In addition, in the same app, there is an automatic cleaning function for the entire apartment. That is, the vacuum cleaner itself returns to the place where it recently cleaned. Such a program is very convenient.

Also, the app provides the ability to call for help from other users, for example, when there is no way to get to the vacuum cleaner, or it is broken.

Vacuum cleaner care

The care of a robot vacuum cleaner should be spirited away by its owner. The first thing to do is to clean the filter located in the waste container. This procedure should be performed at least once a week.

You should also regularly clean the dust collector, which should be disassembled and thoroughly rinsed. This will prevent dust and dirt from getting into the battery.

It should be remembered that the robot vacuum cleaner - it is an autonomous device and it is able to keep the floor clean itself. Care for the vacuum cleaner includes cleaning all removable nozzles, filters and other accessories. To make this procedure easier, you can use special cleaning products.

Problems and troubleshooting

Even the best-quality robot vacuum cleaner can have the following problems during long-term use.

Problem 1. The robot does not detect obstacles in the form of curtains, drapes, walls, etc. In fact, robot vacuum cleaners do this task wonderfully. In this case, it is necessary to check the correction of the motion sensor - this can happen due to poor contact of the sensor. If this does not happen, then it's a matter of settings.

Problem 2. The robot does not find the charging wire or docking station. In this case, you need to check the connection of the charger and the robot, as well as the charging of the robot itself. If the charger is connected correctly, you need to check the connection of the docking station.

Problem 3. Vacuum cleaner does not start after charging is complete. You need to wait until the robot vacuum cleaner is completely disconnected from the docking station, then connect it to an outlet and start it with the button.

Problem 4. The robot is not moving, not cleaning, not changing direction. To get rid of this problem, you need to clean and lubricate the brushes, check if the shock sensor works and replace the control unit.

Useful video

From this video you will learn how to easily set up a robot vacuum cleaner: