Kenwood Blend Xtract SB055WG: blender specifications and how to properly use + customer reviews

Blenders from the company Kenwood are quite popular. Models of this brand are designed for a variety of purposes - from kneading dough to chopping products.

The bodies of the company's blenders are made of cast aluminum, which makes them strong and durable, as well as resistant to various types of damage. The motor is protected from overloading and overheating.

Most sets are equipped with bowls that do not absorb odors - made of heat-resistant glass.

Kenwood Blend Xtract SB055WG

The particular model is stationary and has small dimensions. Its power is not very big - 300 watts.

A tall bowl with a handle for 200 milliliters is firmly attached to the mechanism. Sharp blades and 2 power modes can easily handle small amounts of food.

It comes with a screw-on lid on the bowl with a drinking hole. This allows you to use the bowl as a container for consuming and storing the finished product, without having to pour/transfer it to another container. The design is very easy to wash.

It's also worth noting that the construction expands to the bottom, and the legs are equipped with rubber pads. This makes the blender as stable as possible and does not allow it to move on the surface during operation.

Blender Functions

Blend Xtract's main function is to whip up smoothies.

For chopping large and solid products, its power is not enough.

Therefore, its application is not very extensive - preparation:

• smoothies;
• smoothies;
• shakes.

In addition, another of the functions of this device is the possibility of using its kits as utensils for consumption.

Technical Specifications

Advantages and disadvantages

Accessories

The set includes:

• 2 0.5 liter bowl containers;
• 2 lids on bowls;
• 4 stainless steel blades.

Detailed instructions

Before using the blender, be sure to study the instructions, as well as safety precautions. Only after that you can start working.

Safety

Before operating the device, proceed as follows:

1. Remove the blender from its packaging.
2. Remove all labels and stickers.

Otherwise follow these instructions:

• Unplug the blender after use.
• Do not use a defective blender.
• Protect the unit, plug and cord from moisture.
• Do not use accessories that are not designed for this appliance.
• Do not leave the blender unattended when it is on.
• Do not remove the bowl until the blade assembly has come to a complete stop.
• Do not mix hot ingredients in the blender.
• Do not touch the sharpened edge of the blades.
• Do not place the appliance near hot objects or heating appliances (including the oven).
• Place the blender only on a flat surface.
• Use the blender only for its intended purpose.

Using

1. Load the blender initially with bulky, dense foods (ice cream, ice, fruit, etc.).
2. If liquid ingredients need to be added, add them last.
3. Do not add ingredients above the maximum mark.
4. Take the blade assembly by the bottom part and screw it tightly on the bowl (turn it clockwise until it clicks).
5. Shake to evenly distribute the ingredients.
6. Place the bowl on the power unit.
7. Turn the mug until it clicks and the mark on the block and the bowl match.
8. Turn the regulator to the desired power.
9. Wait for the foods to mix into a smooth consistency.
10. After the ingredients are mixed and the desired consistency is obtained, turn the power lever to the "off" mark.
11. Wait until the knife block stops completely.
12. Turn the mug counterclockwise and remove it from the power unit.
13. To remove the blade assembly, turn the bowl over and while holding it, turn the assembly counterclockwise.
14. Install and lock the lid by turning it clockwise.
15. In order to use the mug for drinking, open the special flap on the lid.

Good to know

• The contents of a full mug is enough for about 2 servings.
• You can keep the mug in the fridge.
• To drink through the lid, the drink should not be too thick.
• For a more liquid consistency of the drink there is a special mode of the blender (intermittent).
• It is forbidden to mix dry products.
• It is forbidden to turn on an empty blender.
• The bowl not removed from the power unit cannot be used as a storage system.
• Do not exceed the specified volume, as some products increase in volume during blending.
• Do not turn on the device for more than 30 seconds in order to prolong its performance.
• Do not whip large frozen foods (you must cut them or divide them into parts).

Care and cleaning

• Always disconnect the appliance from the power supply before cleaning.
• Disassemble the appliance.
• Do not immerse the power unit or the cord and plug in water.
• Wash the appliance immediately after use.
• Do not wash any part of the appliance in the dishwasher.
• The power unit can be wiped with a slightly damp cloth.
• When washing the knife block, do not touch the sharp elements.
• Do not submerge the knives under water, just wipe them in soapy hot water and then rinse.
• The knife block should be dried upside down
• The mug and lid should be washed by hand with soapy water, then rinsed clean.
• The lid and the bowl should also be dried upside down.

What to pay attention to when buying?

When choosing a device, you need to check its performance, as well as the possibility of whipping in both modes. You should also pay attention to the equipment.

It is important that the device is not damaged. It is necessary to inspect the power supply and check that it is in good working order and has no visible damage. Make sure that the bowl is not cracked and that the knife block snaps tightly into place.

The knives should be sharpened and not bent.

Shopper Reviews

{{ reviewsOverall }} / 5 Owner's Rating (5 votes)

Brand/Model Rating

Number of votes

Sort by: Most recently Highest score Most helpful Worst score

Be the first to leave a review.

Verified by

{{{review.rating_title }}}

{{{review.rating_comment | nl2br}}}

Show more

{{ pageNumber+1 }}

Add your review!

Price range.

Prices for this model range from 3,500 to 4,000 rubles.

Useful Video

Watch the Kenwood Blend Xtract SB055WG to find out how it works: